Ég lenti í smá vandræðum með sjónvarpsflakkarann minn..
ég var að update-a firmwareinu og fór eftir öllum leiðbeiningunum sem fylgdu á dvico síðunni, en þegar ég ætla að nota hann við sjónvarpið mitt þá kemur bara no data og það stendur PAL fyrir ofan það með litlum rauðum stöfum.
Harðidiskurinn minn er :: samsung 400gb/7200rpm/8m/PATA MODEL: HD400LD
hérna er það sem stóð á síðunni
Improved HDD compatibility (Some WesternDigital and Samsung HDDs which you can attach to your PC without a problem, but in your TV you cannot see other than loading). There is no change except this.
However, to upgrade firmware you must use other than incompatible WesternDigital or Samsung HDDs.
This firmware consists of three files, so please make sure you put all three files to tvixfw folder on the root.
** How to upgrade firmware. **
1. Remove an incompatible HDD from your TVIX.
2. Put an compatible HDD to your TVIX.
3. Copy firmware files(three) to the tvixfw folder on the disk of TVIX after attaching to your PC using USB. If there is no tvixfw folder on the root of disk, please make first. Please check the folder name is tvixfw.
4. Detach your TVIX with safe remove feature of your OS.
5. When the power is off, push the MENU button. While you are pushing the MENU button push the Power button at the same time for 2 seconds. After a few seconds there will be a bluescreen for the F/W.
6. Press Ok to upgrade your firmware when you see the below screen.
7. After two progress bar has been shown and you see the message “Update successfully done! Power off your TVIX player”, turn off your TVIX.
8. Replace your HDD to WesternDigital or Samsung HDD which was not compatible before.
Veit e-r hvað ég get gert til að laga þetta plííís?
